M8 Hex Nut, ISO 4032 / DIN 934 size drawing (PDF)

Datasheet — M8 Hex Nut, ISO 4032 / DIN 934 by Milo

Open the PDF
M8 Hex Nut, ISO 4032 / DIN 934Get the CAD modelM8 Hex Nut, ISO 4032 / DIN 934CC-ISO4032-SZ-M8.pdf

Text of this datasheet

ISO 4032 hexagon regular nut (style 1), M8

Size drawing - M8 values on the views - enlarged 5:1

Sym. Dimensi

Thread pitch ra

12.865 12.73-13.00

Width across flats

2 Width across corners 2 14.38

Nut height Oot

6.44-6.80 @ = 105° 90°-120°

> Wrenching height 2 5.26

6.44-6.80

2 11.60 Bearing face diameter

8.375 8.00-8.75

Countersink diameter

22.5 15-30

Corner chamfer angle, deg

105 90-120

Countersink angle, deg

Basic minor diameter (crests) Gos

tap Tap drill (method D - P) 6.75

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

s = 12.865 12.73-13.00

House convention = a detail no source dimensions, drawn to a stated house rule.

This size's values: L2 11-L16.

Notes

s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014).

e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. Washer face c is not modeled (nuts are delivered without one); it is listed in the datasheet.

e2 14.38

View from above

TITLE

'? CommunityCAD Size drawing, M8

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4032:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M8

SHEET REV SCALE PROJECTION UNITS CC-1S804032-SZ-M8 A 5:11 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.