ISO 4032 hexagon regular nut (style 1), M8
Size drawing - M8 values on the views - enlarged 5:1
Sym. Dimensi
Thread pitch ra
12.865 12.73-13.00
Width across flats
2 Width across corners 2 14.38
Nut height Oot @=105° 6.44-6.80 90°-120°
> Wrenching height 2 5.26 m = 6.62 6.44-6.80
2 11.60 Bearing face diameter
8.375 8.00-8.75
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
105 90-120
Countersink angle, deg
Basic minor diameter (crests) Gos
tap Tap drill (method D - P) 6.75
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
s = 12.865 12.73-13.00
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 11-L16.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014).
e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. Washer face c is not modeled (nuts are delivered without one); it is listed in the datasheet.
e2 14.38
View from above
TITLE
'? CommunityCAD Size drawing, M8
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4032:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M8
SHEET REV SCALE PROJECTION UNITS CC-1S804032-SZ-M8 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE c11b872e81fe4ea779a93a8b42a2cSdadf16472d CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.