ISO 4014 hexagon head bolt, M8
Size drawing - M8 values on the views - | = 40 shown: enlarged 2:1
Source levels Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max). Thread pitch . Grey under a value = its min-max, where the source gives both. 12.865 </ = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free Width across corners 2 14.38 preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. Head height LO = one source only: printed amber and marked *
Width across flats 12.73-13.00
c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions,
dw = 11.63 ——
r20.40, da< 9.2 Wrenching height
0.375 drawn to a stated house rule. Ig s 18.0, Is = 11.75 Washer face height . This size's values: L2 15 - L16. 0.15-0.60 Notes 2 11.63 s: modeled at the middle of its band; e and kw are
Bearing face diameter checks, not modeled.
| = 40 shown Head top chamfer, deg lengths 40-80
Underhead fillet radius
Transition diameter
7.89 7.78-8.00
< 50° (ISO 4753CH) | Thread length cis
| | Transition length
di = 6.6468
Shank diameter
Basic minor diameter (end face)
View from above Tap drill (method d - P) |
| 7 \ End chamfer angle, deg
s = 12.865 12.73-13.00
Na,
e = 14.38
TITLE
'? CommunityCAD Size drawing, M8
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - M8
SHEET REV SCALE PROJECTION UNITS CC-1S804014-SZ-M8 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
€05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.