ISO 4028 hexagon socket set screw, dog point, M8
Size drawing - M8 values on the views - | = 12 shown - enlarged 5:1
Thread pitch
| < ° lew on tha Socket across flats +0575 6.6468 View on the socket end ens 1 a = 50° (CH) 2 4.583
Socket across corners Zo Socket depth, short lengths s = 4.0575 - Socket depth, other lengths - 5.35 | = 12 shown N Dog diameter lengths 8-40 Q) $.2-5.5
\ es, 2.125 Dog length, short lengths 2.00-2.25
e = 4.583 4.15 Dog length, other lengths
B s 50° (ISO 4753 SD/LD)
Dog chamfer to axis, deg
Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t and z.
TITLE
'? CommunityCAD Size drawing, M8
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, dog point - M8
SHEET REV SCALE PROJECTION UNITS CC-1S04028-SZ-M8 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.