M8 Cup Point Set Screw, ISO 4029 size drawing (PDF)

Datasheet — M8 Cup Point Set Screw, ISO 4029 by Milo

Open the PDF
M8 Cup Point Set Screw, ISO 4029Get the CAD modelM8 Cup Point Set Screw, ISO 4029CC-ISO4029-SZ-M8.pdf

Text of this datasheet

ISO 4029 hexagon socket set screw, cup point, M8

Size drawing - M8 values on the views - | = 10 shown - enlarged 5:1

Thread pitch

di = 6.6468 View on the socket end 4.0575 Socket across flats 4.020-4.095

a = 50° (CH (CH) > 4.583 Socket across corners

Socket depth, short lengths

s = 4.0575 4.020-4.095

Socket depth, other lengths |= 10 shown

lengths 8-40 . . Cup rim diameter

6 = 120° ref, recess (ref)

Cup chamfer to axis, deg

Cup recess angle, deg B s 50° (ISO 4753 CP) Basic minor diameter (end face)

Tap drill (method d - P)

Socket-end chamfer angle, deg

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.

Notes

Short lengths (sheet DO1) take the 'short' t.

TITLE

'? CommunityCAD Size drawing, M8

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4029:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cup point - M8

SHEET REV SCALE PROJECTION UNITS CC-1S04029-SZ-M8 A 5:11 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.