ISO 7090 plain washer, chamfered, normal series, grade A, M8
Size drawing - M8 values on the views - enlarged 5:1
Sym. | Dimensi Ms
di Hole diameter (nom = min) 8.4
16
d2 Outside diameter (nom = max) 15.57-16
1.6 1.4-1.8
Thickness
37.5%
Chamfer angle from the axis, ° 30-45
0.375*
c/h — Chamfer height / thickness 0.25-0.5
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L13 - LO 2.
Notes
d1 nom = d1 min and d2 nom = d2 max (the standard's own convention); h nom lies in its band. Edges are sharp, walls square to the faces: house conventions, sheet DO2.
a and c/h: entered by the owner from the standard's figure (#472), one source (LO); modeled at the middle of their bands, c applied to the modeled h, +Z face only.
d2 = 16 15.57-16
View from above
TITLE
'? CommunityCAD Size drawing, M8
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 7090:2000 Chamfered plain washer - M8 SHEET REV SCALE PROJECTION UNITS CC-1S07090-SZ-M8 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE e79bc69c722a7450eb0be681b46a36c48d05506e CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.