ISO 7380-1 hexagon socket button head screw, M8
Size drawing - M8 values on the views - | = 25 shown - enlarged 2:1
View from above dk = 13.785 13.57-14.00
dL = 7.7 ref . rf = 7.70 (dome, on the axis) 7.45-7.95 s = 5.080 5.020-5.140
\
rs 2 0.40, da < 9.2
k = 4.25 4.10-4.40
| = 25 shown lengths 12-80
< 50° (ISO 4753 CH)
d1 = 6.6468
Thread pitch
Head diameter
Head height
Flat top diameter
Dome radius
Socket across flat
Socket depth
Wall under socket
Shank diameter
Thread length
M8
1.25
13.785 13.57-14.00
4.25 4.10-4.40
7.7 ref
7.70 7.45-7.95
5.080 5.020-5.140
is
2 5.723
Socket across corners
2.60
Underhead fillet, part thread
Underhead fillet, full thread
Transition diameter
Bearing face diameter
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
'? CommunityCAD
TITLE
Size drawing, M8
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
</ 2 = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 16 - L16.
Notes
s: the nominal is the key size; the socket is modeled at the middle of its band.
‘STANDARDS FOLLOWED ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-
1/1SO 261 (thread)
FAMILY / DETAIL Button head screw - M8
SHEET REV
CC-1S07380-SZ-M8 A
SCALE
2:1
PROJECTION
UNITS
Dimensions in mm
SPEC VERSION cfd05b053c736a4F15ba3030aa41Febd40cdc205
LICENSE CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
