CC-1S07380-DS-M8 revA Size datasheet - M8
'?) CommunityCAD
ISO 7380-1 M8 hexagon socket button head screw
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread M8 x 1.25, ISO metric coarse, a Lengths 13 generated, | = 12-80 Files 26 STEP AP214 (simplified + threaded)
Simplified - M8x16, front view, 2.5:1 Threaded - M8x16, front view, 2.5:1 Sym. Dimension Value P Thread pitch 1.25 dk Head diameter 13.785 13.57-14.00 k Head height 4.25 4.10-4.49 dL Flat top diameter 7.7 ret rf Dome radius 7.70 7.45-7.95 s Socket across flats 5.080 5.020-5.140 e Socket across corners 2 5.723 t Socket depth 2 2.60 w Wall under socket 21.05 rs Underhead fillet, part thread 2 0.40 rt Underhead fillet, full thread 2 0.70 ds Shank diameter 7.89 7.78-8 da Transition diameter £$ 9.2 dw Bearing face diameter b Thread length d1 Basic minor diameter (end face) tap Tap drill (method d - P) a End chamfer angle, deg
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 1/2 Button head socket screw - M8 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
'?) CommunityCAD
CC-1S07380-DS-M8 revA Size datasheet - M8
Lengths
| Thread 12 tothe head 16 tothe head 20 tothe head 25 tothe head 30 tothe head 35 tothe head
40 partial >
45 partial 2 10. 50 partial 215. 55 partial 2 20. 60 partial 2 25. 70 partial 2 85. 80 partial 2 45.
5.
75 75 75 75 75 75 75
Ig Part key
IA
1 1 2 2 3 4 5
IA IA IA IAA
IA
- iso7380-m8x12 - iso7380-m8x16 - is07380-m8x20 - is07380-m8x25 - is07380-m8x30 - is07380-m8x35 2 iso7380-m8x40 7 iso7380-m8x45 2 is0o7380-m8x50 7 iso7380-m8x55 2 is07380-m8x60 2 iso7380-m8x70 2 iso7380-m8x80
Is = plain shank (min), Ig = bearing face to the first full thread (max). To the head: full thread up to 3P from the bearing face. Listed by one source
only, not generated: | = 10, 14, 18, 22, 65, 90, 100.
Conventions
« End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
* Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t. e Head: flat top dL at k, dome rf centred on the axis down to dk, rim at dk; no knurl.
« Thread (threaded level): ISO 68-1 basic profile; full thread to Ig, quarter-turn fade toward the head. Threaded to the head: a core at 11 with rt. « Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources Source Publisher amesweb-tap-drill AMESweb pule-tap-drill CommunityCAD pule-basic-minor CommunityCAD
iso4753-2011-sample ISO (preview published by iTeh
Standards)
fasten-it-iso7380-1 fasten.it
fasteners-eu-iso7380-1 fasteners.eu
amesweb-iso7380-1 AMESweb
amesweb-iso7380-1-Lengths AMESweb
iso7380-1-2011-sample ISO (preview published by iTeh
Standards)
ISO (preview published by iTeh Standards)
iso7380-1-2011-sample-lLengths
The whole series (verification map, corrections, drawings): CC-ISO7380-DS.
ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread)
Retrieved
2026-10-23 2026-10-23 2026-10-23
n/a
2026-10-25 2026-10-25 2026-10-25 2026-10-25
n/a
n/a
Button head socket screw - M8 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
sha256
e6501cc1414a 625b582c306e £00329692204
7526d25f9381 (kept outside the repo)
Ob30bee8c94e 786a69C06968 4¥662340a35a 67d0b9F58c9a 9ca554d7cb13 (kept outside the repo)
9ca554d7cb13 (kept outside the repo)
Page 2/2 spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
