Heat-set threaded insert, per thread and length, M6x6.8
Size drawing - M6x6.8 values on the views - enlarged 8:1 Dimension Length di Knurl outside diameter
d2 Pilot diameter
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: LO 3.
Notes
No published standard: values from the makers' tables (ADR 0034).
Knurl, groove, lead and pilot proportions are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, M6x6.8
STANDARDS FOLLOWED FAMILY / DETAIL No published standard (makers' tables) Heat-set threaded insert - M6x6.8
SHEET REV SCALE PROJECTION UNITS
CC-HSINSERT-SZ-M6x6.8 A 8:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
1431dca0786db211c4968b488128bf6d30bccSdb CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.