M6 Threaded Rod (All Thread Rod), DIN 976-1

M6 threaded rod (DIN 976-1), threaded M6 × 1 along its whole length, in a 1000 mm piece. Download it as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: M6 rod, M6 x 1000 rods
• Model id: din975-976-a-m6
• Standard: DIN 976-1:2016 · thread M6 × 1, ISO metric coarse, right hand

Lengths

Length (mm)	Part key	Simplified
1000	din975-976-a-m6x1000	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
l	Rod length		1000		1000	nominal	L1
mass	Mass per 1000 rods		177		177	nominal	L1
P	Coarse thread pitch		1		1	nominal	L1
tap_drill	Tap drill diameter		5		5	nominal	L1
d1	Basic minor diameter		4.917468		4.917468	nominal	L1
ch_angle	Chamfered end angle			50	50	single limit (max), modeled at the limit	L2
dh_fine	Clearance hole, fine series		6.4		6.4	nominal	L1
dh_medium	Clearance hole, medium series		6.6		6.6	nominal	L1
dh_coarse	Clearance hole, coarse series		7		7	nominal	L1

Thread and holes

• Tap drill: 5 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
• Clearance hole (ISO 273): close 6.4, normal 6.6, loose 7 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).

Drawing

As a PDF: CC-DIN976-1-SZ-M6.pdf.

The M6 threaded rod beside the M5 and the M8

The M6 is number 6, counting from the smallest, of the 7 DIN 976-1 threaded rods published here, from M2 to M8.

• Rod length (l): 1000 mm on the M6 threaded rod, the same on the M5 and the M8.
• Coarse thread pitch (P): 1 mm on the M6 threaded rod, against 0.8 mm on the M5 and 1.25 mm on the M8.
• Tap drill diameter (tap_drill): 5 mm on the M6 threaded rod, against 4.2 mm on the M5 and 6.75 mm on the M8.
• Basic minor diameter (d1): 4.917468 mm on the M6 threaded rod, against 4.1339744 mm on the M5 and 6.646835 mm on the M8.
• Chamfered end angle (ch_angle): up to 50° on the M6 threaded rod, the same on the M5 and the M8.
• Clearance hole, fine series (dh_fine): 6.4 mm on the M6 threaded rod, against 5.3 mm on the M5 and 8.4 mm on the M8.
• Clearance hole, medium series (dh_medium): 6.6 mm on the M6 threaded rod, against 5.5 mm on the M5 and 9 mm on the M8.
• Clearance hole, coarse series (dh_coarse): 7 mm on the M6 threaded rod, against 5.8 mm on the M5 and 10 mm on the M8.

Other sizes

• One size smaller: M5 Threaded Rod (All Thread Rod), DIN 976-1, 1000 mm long.
• One size larger: M8 Threaded Rod (All Thread Rod), DIN 976-1, 1000 mm long.

Documents

• CC-DIN976-1-DS-M6.pdf: M6 datasheet: values with levels, lengths, sources
• CC-DIN976-1-SZ-M6.pdf: M6 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

albany-clearance, amesweb-tap-drill, fasten-it-din975, fasteners-eu-din975, iso4753-2011-sample, rule-basic-minor, rule-tap-drill, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.