ISO 4035 hexagon thin nut (style 0), M6
Size drawing - M6 values on the views - enlarged 5:1
Sym. Dimensi
Thread pitch
da = 6.375 Width across flats gat
e@ 211.05 ~% o0-655 9.78-10.00
2 | Width across corners 2 11.05
. Nut height Sols 6 =115° 2.90-3.20 _jo=me]
110°-120° Wrenching height 2.3
2 8.90
Bearing face diameter
6.375 6.00-6.75
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
115 110-120
Countersink angle, deg
Basic minor diameter (crests) aS)
tap Tap drill (method D - P)
s=9.89
9.78-10.00 Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 10 - L16.
Notes
View from above s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face: ISO 4035 has no washer face form, so there is no c (ADR 0040 row 5).
e 211.05
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4035:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M6
SHEET REV SCALE PROJECTION UNITS CC-1S04035-SZ-Mé6 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
