DIN 557 square nut (product grade C), M6
Size drawing - M6 values on the views - enlarged 5:1
Sym. Dimensi
Thread pitch
9.82 9.64-10
D Width across flats e = 13.315 12.53-14.1 T
13.315 12.53-14.1
Width across corners
4.76 4.52-5
Nut height
3.2
Height at the corners
8.7 Bearing face diameter
B = 22.5°*
15°-30° Chamfer angle, deg
Basic minor diameter (crests)
tap Tap drill (method D - P)
Source levels I Main value = the modeled value (nominal, else the middle of min-max). e = 13.315 Grey under a value = its min-max, where the source gives both. 12.53-14.1 _ q one . _ View from above (the plain face) </ 2 =the source gives only that limit, modeled at it. ref = reference. ; L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 1- L112 - LO 1.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). e is not modeled on its own: the sharp square gives e = s-v2 from the modeled s, checked. dw min sets the bearing-face chamfer's face circle, (dw min + s) / 2.
mw min is checked at the corners (the square's height left above the chamfer).
B is the owner's entry from a maker drawing (one source, not required).
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 557:1994-01 - ISO 68-1/ ISO 261 (thread) Square nut - M6
SHEET REV SCALE PROJECTION UNITS CC-DIN557-SZ-M6 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.