DIN 127 split lock washer, form B, M6
Size drawing - M6 values on the views - enlarged 5:1
Sym. | Dimensi M6
6.3c 6.1-6.5
di Bore diameter
< d2 Outside diameter (max) eens
2.5 2.35-2.65
Section width
1.6 1.5-1.7
Section thickness
0.3
Section corner radius
3.5 Free height, form B
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). | L1 = two or more independent sources agree: the release gate. d2 < 11.8 LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. View from above This size's values: L16. Notes The outside is d1+ 2b at the modeled values; d2 is the standard's maximum.
Helix, split and section corners: house conventions from the owner's #581 answers, DO2.
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 127:1987 Split lock washer, form B - M6
SHEET REV SCALE PROJECTION UNITS CC-DIN127-SZ-M6 A 5:1 Dimensions in mm SPEC VERSION LICENSE PAGE e79bc69c722a7450eb0be681b46a36c48d05506e CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.