ISO 4762 hexagon socket head cap screw, M6
Size drawing - M6 values on the views - | = 16 shown - enlarged 5:1
Source levels Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max). Thread pitch Grey under a value = its min-max, where the source gives both. , , 9.89 < / = = the source gives only that limit, modeled at it. dk= ‘9.89 Head diameter, plain ene ref = reference. 9.78-10.00 <0. L2 = the standard itself (or its complete free preview, $10.22 or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says 5.08 how. 5.02-5.14 House convention = a detail no source dimensions,
Head diameter, knurled
View from above Head height Dott 5.7-6.0
Socket across flats
drawn to a stated house rule.
2 5.723 Socket across corners This size's values: L2 1- L119 - LO 2.
Notes
ZO ——————— ; s: the nominal is the key size; the socket is modeled at
Socket depth the middle of its band.
r= 0.325%, da < 6.8 Wall under socket
Head top chamfer 8-6
0.325* 0.25-0.4
Underhead fillet radius |= 16 shown
lengths 10-60 5.91
5.82-6.00
< Transition diameter S Gol > Bearing face diameter = 7-38 < 50° (ISO 4753 CH) Thread length BS Re QJ
4.9175
Shank diameter
Basic minor diameter (end face)
d1 = 4.9175
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Socket head cap screw - M6 SHEET REV SCALE PROJECTION UNITS CC-1S804762-SZ-Mé6 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 54d2547caedeObédef71904216be1e6990995d2a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.