. CC-1S07092-DS-M6 revA '?) CommunityCAD Size datasheet - M6
ISO 7092 M6 plain washer, small series
Size datasheet: this size's values with their levels, conventions and sources.
For M6 bolts and screws Part key iso7092-m6
| Files 1 STEP AP214 (simplified)
M6, front view, 3:1 M6, view from above, 2:1
Dimension
6.40 6.40-6.62
Hole diameter (nom = min)
d2 Outside diameter (nom = max) 11.00 10.57-11.00
h Thickness 1.6 1.4-1.8
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 7092:2000 Page 1/2 Plain washer, small series - M6 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-1S07092-DS-M6 revA '?) CommunityCAD Size datasheet - M6
Conventions
« Edges: Sharp on both faces, outside and hole: no edge break, die-roll or burr.
e Walls and faces: The hole and the outside are true cylinders at d1 and d2, square to flat, parallel faces. No chamfer, no dish; the flatness tolerance isn't modeled.
e Values: d1 and d2 at their nominals (the standard puts them at d1 min and d2 max), h at its nominal.
« Markings and hardness class: No markings. Hardness class (200 HV, 300 HV) is metadata only: one model per size.
Sources Source Publisher Retrieved sha256 iso7092-2000-sample ISO (preview published by iTeh Standards) n/a 09a0441f6a92 (kept outside the repo) fasten-it-iso7092 fasten.it 2026-10-25 59c87aébd3b9 fasteners-eu-iso7092 fasteners.eu 2026-10-25 1c8591dd1c00 amesweb-iso7092 AMESweb 2026-10-25 df81d75a0354
The whole series (verification map, corrections, drawings): CC-ISO7092-DS.
ISO 7092:2000 Page 2/2 Plain washer, small series - M6 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.