CC-DIN6798-DS-M6 revA Size datasheet - M6
'?) CommunityCAD
DIN 6798 M6 serrated lock washer
Size datasheet: this size's values with their levels, conventions and sources, for its forms A, J and V.
For M6 bolts and screws Part keys din6798-a-m6, din6798 -j- m6, din6798-v-m6
Files 3 STEP AP214 (simplified): forms A, J and V
M6 form A, front view, 3:1 M6 form A, view from above, 2:1
Sym. Dimension Value Level
di Bore diameter, every form 6.4 L1 - 3 6.4-6.62
d2 Outside diameter, A and J 41 L1- 3 10.57-11
si Sheet thickness, A and J 0.7 L1- 3
d3 Outside diameter, V 11.8 l1- 4
s2 Sheet thickness, V 0.4 L1- 3
zA Teeth, form A (min) >12 L1 - 3
zJ Teeth, form J (min) >9 L1 - 3
zV Teeth, form V (min) >16 L1- 3
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
DIN 6798:1988 Page 1/2 Serrated lock washer - M6 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-DIN6798-DS-M6 revA Size datasheet - M6
'?) CommunityCAD
Conventions
e Values: Bore d1, outside diameter d2 (A, J) or d3 (V) and sheet thickness s1 (A, J) or s2 (V) at their nominals; each form's tooth count at its minimum, a single limit.
« Teeth: Equal teeth, evenly spaced, the first on +X. Slit roots on the circle midway between d11 and d2; teeth and V gaps take equal arcs on the tooth-end circle; sharp roots.
« Twist, forms A and J: Each tooth turned about its radial centre line, right hand, so the envelope height is h = 3 s1 (owner, #577), trimmed to the tooth-end circle.
« Cone, form V: Sheet s2 on a 90 degree cone (owner, #577), edges square to the face, the land half the slant, teeth not twisted.
« Edges, markings and finish: Teeth of forms A and J: a light edge break, a round of s1 / 4 on every tooth edge (house polish, owner #830); the land and form V sharp. No markings. Material and finish are metadata only: one model per size and form.
Sources Source Publisher Retrieved sha256 fasten-it-din6798 fasten.it 2026-10-25 38475a4924f3 engineersedge-din6798 Engineers Edge 2026-10-25 68a8f63eb982 bossard-bn786 Bossard 2026-10-25 fae3a3S5adéef (kept outside the repo) globalfastener-din6798-a globalfastener.com (Internet Archive copy, 2026-10-25 fc811b2a3bef captured 2026-01-20) globalfastener-din6798-j globalfastener.com (Internet Archive copy, 2026-10-25 08f45e32374b captured 2026-01-13) globalfastener-din6798-v globalfastener.com (Internet Archive copy, 2026-10-25 731d8b0b8cb7
captured 2026-01-23)
The whole series (verification map, corrections, drawings): CC-DIN6798-DS.
DIN 6798:1988 Page 2/2 Serrated lock washer - M6 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e79bc69c722a7450eb0be681b46a36c48d05506e
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.