ISO 4032 hexagon regular nut (style 1), M6
Size drawing - M6 values on the views - enlarged 5:1
Sym. Dimensi
Thread pitch
da = 6.375 Width across flats Dold 6.00-6.75 9.78-10.0
1 Width across corners
SSS Ss . .
Nut height SoH 4.90-5.20 >
Wrenching height 2 3.98
e 211.05
2 11.05
8.90 Bearing face diameter
6.375 6.00-6.75
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
105 90-120
Countersink angle, deg
Basic minor diameter (crests) aS)
tap Tap drill (method D - P)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 11-L16.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). e=11.05 e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min.
dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat.
View from above Washer face c is not modeled (nuts are delivered without one); it is listed in the datasheet.
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4032:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M6
SHEET REV SCALE PROJECTION UNITS CC-1S04032-SZ-Mé6 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
