ISO 4032 hexagon regular nut (style 1), M6
Size drawing - M6 values on the views - enlarged 5:1
Sym. Dimensi
Thread pitch
9.89 9.78-10.0
Width across flats
2 Width across corners 2 11.05
5.05c 4.90-5.20
Nut height
> Wrenching height 2 3.98
8.90 Bearing face diameter
6.375 6.00-6.75
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
105 90-120
Countersink angle, deg
Basic minor diameter (crests) aS)
tap Tap drill (method D - P)
Source levels Main value = the modeled value (nominal, else the middle of min-max). $= 9.89 Grey under a value = its min-max, where the source gives both. 9.78-10.0 < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 11-L16. Notes s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). e=11.05 e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min.
dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat.
View from above Washer face c is not modeled (nuts are delivered without one); it is listed in the datasheet.
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4032:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M6
SHEET REV SCALE PROJECTION UNITS CC-1S04032-SZ-Mé6 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE c11b872e81fe4ea779a93a8b42a2cSdadf16472d CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.