ISO 4017 hexagon head screw, M6
Size drawing - M6 values on the views - | = 20 shown - enlarged 2:1
Sym. Dimensi Thread pitch
9.89 9.78-19.00
View from above Width across flats
2 11.05
a \ Width across corners
385415___ ye = 0.325 s = 9.89 | 1075-0.50 a = 2.00 9.78~10.00 1.00-3.00
Head height
r20.25,da<68 ee
Wrenching height
| = 20 shown : 0.325 lengths 12-60 Washer face height
0.15-0.50
> Bearing face diameter 2 8.88
= 50° (ISO 4753 CH) Head top chamfer, deg
Underhead fillet radius
Transition diameter
2.00 1.00-3.00
Thread run-out under head Basic minor diameter (end face) GoHlets
Tap drill (method d - P)
End chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 15 - L16.
Notes
s: modeled at the middle of its band; e and kw are checks, not modeled.
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head screw - M6
SHEET REV SCALE PROJECTION UNITS CC-1S804017-SZ-Mé6 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE e05c8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.