* CC-1S04014-DS-Mé revA '?) CommunityCAD Size datasheet - M6
ISO 4014 M6 hexagon head bolt
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread M6 x 1, ISO metric coarse, right hand Lengths 6 generated, | = 30-60 Files 12 STEP AP214 (simplified + threaded) Simplified - M6x30, front view, 1.5:1 Threaded - M6x30, front view, 1.5:1 Sym. Dimension Value Level P Thread pitch 1 L2.-4 s Width across flats 9.89 9.78-10.00 e Width across corners 2 11.05 k Head height 4.0 3.85-4.15 kw Wrenching height 2 2.70 c Washer face height 0.325 @.15-0.50 dw Bearing face diameter 2 8.88 B Head top chamfer, deg 225) 15-30 r Underhead fillet radius 2 0.25 da Transition diameter < 6.8 ds Shank diameter 5.91 5.82-6.00 b Thread length 18 ref lf Transition length £ 1.4 d1 Basic minor diameter (end face) 4.9175 L1- 2 tap Tap drill (method d - P) 5 L1- 2 a End chamfer angle, deg < 50
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 1/2 Hex head bolt - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S04014-DS-Mé revA Size datasheet - M6
'?) CommunityCAD
Lengths | Thread Is Ig Part key 30 partial 2 7.0 $12.0 is04014-m6x30 35 partial 2 12.0 $17.0 is04014-m6x35 40 partial 2 17.0 < 22.0 is04014-m6x40 45 partial > 22.0 < 27.0 is04014-m6x45 50 partial 2 27.0 < 32.0 is04014-mé6x50 60 partial > 37.0 < 42.0 is04014-m6x60
Is = plain shank (min), Ig = bearing face to the first full thread (max).
Conventions
« End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
« Head: hexagon at the modeled s, one corner on +X; washer face (dw min + s) / 2, c high; top chamfer at B (house construction, ADR 0052 amendment 1).
« Thread (threaded level): ISO 68-1 basic profile, right hand. « Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25f9381 (kept outside the repo) iso4017-2022-sample ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4017-2022-sample-figure ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4014-2022-sample ISO (preview published by iTeh Standards) n/a 2e44b7555604 (kept outside the repo) fasten-it-iso4017 fasten.it 2026-10-25 395693958e2b
fasten-it-iso4014 fasten.it 2026-10-25 50a81d6072b8
fasteners-eu-iso4017 fasteners.eu 2026-10-25 161753a8c338
globalfastener-iso4017 globalfastener.com (Internet Archive copy, 2026-10-25 6c30078c626e
captured 2020-07-12)
globalfastener-iso4017-2022 globalfastener.com (Internet Archive copy, 2026-10-25 9aa6930a2aa3 captured 2026-03-16)
fuller-iso4014 Fuller Fasteners 2026-10-25 1130347fbf24 engineersedge-iso4014-4017 Engineers Edge 2026-10-25 1466bfae2ba8
The whole series (verification map, corrections, drawings): CC-ISO4014-DS.
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Hex head bolt - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
