ISO 4014 hexagon head bolt, M6
Size drawing - M6 values on the views - | = 30 shown - enlarged 2:1
Source levels Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max). Thread pitch Grey under a value = its min-max, where the source gives both. 9.89 </ = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free Width across corners 2 11.05 preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. Head height LO = one source only: printed amber and marked *
Width across flats 9.78-10.00
c = a source value was corrected; the datasheet
r20.25,da<6.8 ‘ Wrenching height says how. 1912.0: 18 = 70 House convention = a detail no source dimensions,
9.325 drawn to a stated house rule. Washer face height . This size's values: L2 15 - L16. 0.15-0.50 Notes |= 30 shown 2 8.88 s: modeled at the middle of its band; e and kw are
Bearing face diameter lengths 30-60 checks, not modeled.
Head top chamfer, deg
Underhead fillet radius
< 50° (ISO 4753 CH)
Transition diameter
5.91 5.82-6.00
Shank diameter
Thread length a3 Fee
View from above | Transition length
yi N s = 9.89 | ! \
9.78-10.00
Basic minor diameter (end face)
Tap drill (method d - P)
NL
End chamfer angle, deg
e 211.05
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - M6
SHEET REV SCALE PROJECTION UNITS CC-1S04014-SZ-Mé6 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
€05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.