M6 Flat Point Set Screw, ISO 4026 size drawing (PDF)

Datasheet — M6 Flat Point Set Screw, ISO 4026 by Milo

Open the PDF
M6 Flat Point Set Screw, ISO 4026Get the CAD modelM6 Flat Point Set Screw, ISO 4026CC-ISO4026-SZ-M6.pdf

Text of this datasheet

ISO 4026 hexagon socket set screw, flat point, M6

Size drawing - M6 values on the views - | = 8 shown - enlarged 10:1

d1 = 4.9175 Thread pitch

a < 50° (CH) 3.05

3.02-3.08

Socket across flats

2 3.443 Socket across corners Socket depth, short lengths

Socket depth, other lengths

| = 8 shown Flat point diameter lengths 6-30

Point chamfer to axis, deg

Basic minor diameter (end face)

Tap drill (method d - P)

Socket-end chamfer angle, deg

B <= 50° (ISO 4753 FL) Source levels

Main value = the modeled value (nominal, else the middle of min-max).

dp = 3.85 Grey under a value = its min-max, where the source gives both.

3.7-4.0 = / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). View on the socket end L1 = two or more independent sources agree: the release gate.

' LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117. Notes Short lengths (sheet DO1) take the 'short' t.

- (ae

3.02-3.08

\

TITLE

'? CommunityCAD Size drawing, M6

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, flat point - M6

SHEET REV SCALE PROJECTION UNITS CC-1S04026-SZ-Mé6 A 10:1 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.