ISO 4026 hexagon socket set screw, flat point, M6
Size drawing - M6 values on the views - | = 8 shown - enlarged 10:1
Thread pitch
d1 = 4.9175
a < 50° (CH) 3.05
3.02-3.08
Socket across flats
2 3.443 Socket across corners Socket depth, short lengths
Socket depth, other lengths
| = 8 shown Flat point diameter lengths 6-30
Point chamfer to axis, deg
Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
B <= 50° (ISO 4753 FL) Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. View on the socket end This size's values: L2 6 - L117.
Notes = (ae 3.02-3.08 \
Short lengths (sheet DO1) take the 'short' t.
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, flat point - M6
SHEET REV SCALE PROJECTION UNITS CC-1S04026-SZ-Mé6 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.