'?) CommunityCAD
CC-1S04026-DS-M6 revA Size datasheet - M6
ISO 4026 M6 hexagon socket set screw, flat point
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread
Lengths Files
Simplified - M6x10, front view, 5:1 Threaded - M6x10, front view, 5:1
Sym. Dimensi
P Thread pitch
s Socket across flats
e Socket across corners
t Socket depth, short lengths
t Socket depth, other lengths
dp Flat point diameter
B Point chamfer to axis, deg
d1 Basic minor diameter (end face) tap Tap drill (method d - P)
a Socket-end chamfer angle, deg
M6 x 1, ISO metric coarse, right hand
8 generated, | = 6-30
16 STEP AP214 (simplified + threaded)
Value 1 l1 + 3.05 L1- 2 3.02-3.08 2 3.443 1-3 >2 l1 +3 23.5 1-3 3.85 L1 2 3.7-4.0 < 50 2-41 4.9175 ll - 2 5 L1- 2 < 50 L2-1
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source
value was corrected. Level - independent sources.
ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Set screw, flat point - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec 82d0e3f1e4052a4ecS59d0F9Fd7b4cF7b5772671
---
CC-1S04026-DS-M6 revA Size datasheet - M6
'?) CommunityCAD
Lengths | Thread t dp Part key 6 full, short 22 3.85 iso4026-m6x6 8 full, long 2B 38 3.85 iso4026-m6x8 10 full, long 23.5 3.85 iso4026-m6x10 12 full, long 2B 38 3.85 iso4026-m6x12 16 full, long 23.5 3.85 iso4026-m6x16 20 full, long > 3.5 3.85 iso4026-m6x20 25 full, long 23.5 3.85 iso04026-m6x25 30 full, long 2B 38 3.85 iso4026-m6x30
Fully threaded. t = the socket depth modeled (t min, short or long by length). Which lengths are short has one source (LO, #584 item 4).
Conventions
« Socket end: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
* Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t min.
« Flat point: ISO 4753 FL, a chamfer at the angle limit to the axis down to the flat dp (midpoint).
¢ Thread (threaded level): ISO 68-1 basic profile, the full length, cut by both ends.
« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25f9381 (kept outside the repo) fuller-iso4026 Fuller Fasteners 2026-10-25 49ba2edb36b7 fuller-iso4027 Fuller Fasteners 2026-10-25 03523ae5e142 fuller-iso4028 Fuller Fasteners 2026-10-25 Of0a658d8693 fuller-iso4029 Fuller Fasteners 2026-10-25 d420eSe6b5F8 fasten-it-is04026 fasten.it 2026-10-25 e111077c¢7750 fasten-it-iso4027 fasten.it 2026-10-25 4e60ee0a98bé6 fasten-it-is04028 fasten.it 2026-10-25 b1f3ca7c19bé fasten-it-iso04029 fasten.it 2026-10-25 198cb790d686 amesweb-is04026-4029 AMESweb 2026-10-25 0643acf2a4F2
The whole series (verification map, corrections, drawings): CC-ISO4026-Ds.
ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Page 2/2 Set screw, flat point - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.