ISO 7380-2 hexagon socket button head screw with collar, M6
Size drawing - M6 values on the views - | = 16 shown - enlarged 5:1
Source levels dc = 13.25 . Main value = the modeled value (nominal, else the 12.90-13.6 middle of min-max). Thread pitch Grey under a value = its min-max, where the dk = 9.82c y
= source gives both. 9.64- . 13.25
Collar diameter </2- A oo. 12.90-13.6 / the source gives only that limit, modeled at
dL = 6.0 ref rf = 5.90 (dome) it. ref = reference.
a 5.65-6.15 Collar height 1, 20c L2 = the standard itself (or its complete free preview, or the maker's drawing).
t=217 Dome diameter at the collar 9 9-82c L1 = two or more independent sources agree: the
k = 3.15 2.08-2.26 release gate.
Head height 3.15 LO = one source only: printed amber and marked
{wb 20.74 3.00-3.30 .
Flat top diameter 6.0 ref c = a source value was corrected; the datasheet
says how. Dome radius 5 5: 90 House convention = a detail no source pow’ dimensions, drawn to a stated house rule. 4.0575 This size's values: L2 17 - L17. 4.020-4.095 Notes 2 4.58 s: the nominal is the key size; the socket is modeled at the middle of its band.
rs = 0.25, da < 6.8
Socket across flats
Socket across corners
2.17
Socket depth 2.08-2.26
| = 16 shown
> lengths 10-30 Wall under socket 2 0.74
> Underhead fillet, part thread 2 0.25
> Underhead fillet, full thread 2 8.50
5.91 5.82-6.00
< 6.8
Shank diameter = 50° (ISO 4753 CH)
Transition diameter
> | Bearing face diameter 2 11.61 \
d1= 4.9175 Thread length 24 ref
Basic minor diameter (end face) 4.9175
Tap drill (method d - P)
View from above End chamfer angle, deg
s = 4.0575 - ( 4,020-4.095 \\
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 7380-2:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Button head screw with collar - M6 SHEET REV SCALE PROJECTION UNITS CC-1IS07380_2-SZ-M6 A 5:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.