ISO 4028 hexagon socket set screw, dog point, M6
Size drawing - M6 values on the views - | = 10 shown - enlarged 10:1
di = 4.9175 Sym. | Dimensi
Thread pitch
3.05 3.02-3.08
Socket across flats
2 3.443 Socket across corners
Socket depth, short lengths
Socket depth, other lengths
3.85 3.7-4.0
Dog di: te |= 10 shown og diameter lengths 8-30
1.625 1.50-1.75
Dog length, short lengths
3.125 3.00-3.25
Dog length, other lengths
B s 50° (ISO 4753 SD/LD) Dog chamfer to axis, deg < 58
Zz = 3.125
3.00-3.25 Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
dp = 3.85
3.7-4.0 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
View on the socket end
1 < / = = the source gives only that limit, modeled at it. ref = reference. 1
- (ae 3.02-3.08 _ _ _ \
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t and z.
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, dog point - M6
ez 3 443 SHEET REV SCALE PROJECTION UNITS ' CC-1S04028-SZ-M6 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
