'?) CommunityCAD
CC-1S04028-DS-M6 revA Size datasheet - M6
ISO 4028 M6 hexagon socket set screw, dog
point
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Simplified - M6x10, front view, 5:1
Sym.
dp
di tap
a
Dimen Thread pitch
Socket across flats
Socket across corners Socket depth, short lengths Socket depth, other lengths
Dog diameter
Dog length, short lengths
Dog length, other lengths
Dog chamfer to axis, deg Basic minor diameter (end face) Tap drill (method d - P)
Socket-end chamfer angle, deg
Threaded - M6x10, front view, 5:1
M6 x 1, ISO metric coarse, right hand
7 generated, | = 8-30
14 STEP AP214 (simplified + threaded)
Value Level
1 l1 +3
3.05 L1- 2 3.02-3.08
2 3.443 1-3
>2 l1 +3
>3.5 L1- 3
3.85 L1- 2 3.7-4.0
1.625 1-3 1.50-1.75
3.125 1-3 3.00-3.25
< 50 2-41
4.9175 ll - 2
5 L1 + 2
< 50 L2-41
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, dog point : M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec 82d0e3f1e4052a4ecS59d0F9Fd7b4cF7b5772671
---
CC-1S04028-DS-M6 revA Size datasheet - M6
'?) CommunityCAD
Lengths | Thread t z_ Part key 8 full, short 22 1.625 is04028-m6x8 10 full, long 2 38 3.125 iso4028-m6x10 12 full, long 23.5 3.125 iso4028-m6x12 16 full, long 2 38 3.125 iso4028-m6x16 20 full, long 23.5 3.125 iso4028-m6x20 25 full, long > 3.5 3.125 is04028-m6x25 30 full, long 23.5 3.125 iso4028-m6x30
Fully threaded. t = the socket depth modeled (t min, short or long by length). Which lengths are short has one source (LO, #584 item 4).
Conventions
* Socket end: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit. * Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t min.
¢ Dog: a plain cylinder at dp and z (midpoints; z_short or z_long by length), no thread, below a chamfer at the angle limit to the axis (ISO 4753 SD/LD). The 'slight radius' edges are sharp: the standard gives no size.
« Thread (threaded level): ISO 68-1 basic profile, the full length, cut by both ends. « Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25f9381 (kept outside the repo) fuller-iso4026 Fuller Fasteners 2026-10-25 49ba2edb36b7 fuller-iso4027 Fuller Fasteners 2026-10-25 03523ae5e142 fuller-iso4028 Fuller Fasteners 2026-10-25 Of0a658d8693 fuller-iso4029 Fuller Fasteners 2026-10-25 d420eSe6b5F8 fasten-it-is04026 fasten.it 2026-10-25 e111077c¢7750 fasten-it-iso4027 fasten.it 2026-10-25 4e60ee0a98bé6 fasten-it-is04028 fasten.it 2026-10-25 b1f3ca7c19bé fasten-it-iso04029 fasten.it 2026-10-25 198cb790d686 amesweb-is04026-4029 AMESweb 2026-10-25 0643acf2a4F2
The whole series (verification map, corrections, drawings): CC-ISO4028-Ds.
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Set screw, dog point : M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.