'?) CommunityCAD CC-1S04029-DS-M6 revA
Size datasheet - M6
ISO 4029 M6 hexagon socket set screw, cup point
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread M6 x 1, ISO metric coarse, right hand
Lengths 8 generated, | = 6-30
Files 16 STEP AP214 (simplified + threaded)
Simplified - M6x10, front view, 5:1 Threaded - M6x10, front view, 5:1
Sym. Dimen Value
P Thread pitch 1 La -
s Socket across flats 3.05 L1- 2 3.02-3.08
e Socket across corners > 3.443 L1 - 3
t Socket depth, short lengths >2 L1- 3
t Socket depth, other lengths >3.5 L1- 3
dz Cup rim diameter 2.875 La - 2 2.75-3.00
B Cup chamfer to axis, deg < 50 L2-1
rs) Cup recess angle, deg 120 ref L2-1
di Basic minor diameter (end face) 4.9175 L1-2
tap Tap drill (method d - P) 5 L1- 2
a Socket-end chamfer angle, deg < 50 L2-1
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 4029:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Page 1/2 Set screw, cup point - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S04029-DS-M6 revA Size datasheet - M6
'?) CommunityCAD
Lengths
| Thread t dz Part key
6 full, short 22 2.875 is04029-m6x6
8 full, long 2 38 2.875 is04029-m6x8 10 full, long 23.5 2.875 is04029-m6x10 12 full, long 23.5 2.875 iso4029-m6x12 16 full, long 23.5 2.875 is04029-m6x16 20 full, long > 3.5 2.875 is04029-m6x20 25 full, long 23.5 2.875 is04029-m6x25 30 full, long 23.5 2.875 is04029-m6x30
Fully threaded. t = the socket depth modeled (t min, short or long by length). Which lengths are short has one source (LO, #584 item 4).
Conventions
« Socket end: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
* Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t min.
« Cup point: ISO 4753 CP, an outer chamfer at the angle limit to the axis down to the rim dz (midpoint), and a conical recess at the Figure 1 j) angle from the rim to its apex, a sharp rim. The recess shape is not specified by the standard (#584 item 3).
¢ Thread (threaded level): ISO 68-1 basic profile, the full length, cut by both ends.
« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25f9381 (kept outside the repo) fuller-iso4026 Fuller Fasteners 2026-10-25 49ba2edb36b7 fuller-iso4027 Fuller Fasteners 2026-10-25 03523ae5e142 fuller-iso4028 Fuller Fasteners 2026-10-25 Of0a658d8693 fuller-iso4029 Fuller Fasteners 2026-10-25 d420eSe6b5F8 fasten-it-is04026 fasten.it 2026-10-25 e111077c¢7750 fasten-it-iso4027 fasten.it 2026-10-25 4e60ee0a98bé6 fasten-it-is04028 fasten.it 2026-10-25 b1f3ca7c19bé fasten-it-iso04029 fasten.it 2026-10-25 198cb790d686 amesweb-is04026-4029 AMESweb 2026-10-25 0643acf2a4F2
The whole series (verification map, corrections, drawings): CC-ISO4029-Ds.
ISO 4029:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Page 2/2 Set screw, cup point - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.