ISO 4027 hexagon socket set screw, cone point, M6
Size drawing - M6 values on the views - | = 8 shown - enlarged 10:1
Thread pitch d1 = 4.9175 I
3.05 ' Socket across flats
3.02-3.08
2 3.443 Socket across corners
Socket depth, short lengths
Socket depth, other lengths
Cone flat diameter |= 8 shown lengths 6-30
Cone angle (included), deg
Cone angle, short lengths, deg
Basic minor diameter (end face)
Vv = 90° included (ISO 4753 TC) Tap drill (method d - P)
Socket-end chamfer angle, deg
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. View on tha socket end LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117. Notes Short lengths (sheet DO1) take the 'short' t and the cone angle. nT (ae | 3.02-3.08 \
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cone point - M6
SHEET REV SCALE PROJECTION UNITS CC-1S804027-SZ-M6 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.