. CC-1S04027-DS-M6 revA '?) CommunityCAD Size datasheet - M6
ISO 4027 M6 hexagon socket set screw, cone point
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread M6 x 1, ISO metric coarse, right hand
Lengths 8 generated, | = 6-30
Files 16 STEP AP214 (simplified + threaded)
Simplified - M6x10, front view, 5:1 Threaded - M6x10, front view, 5:1
Sym. Dimen Value
P Thread pitch 1 La -
s Socket across flats 3.05 L1- 2 3.02-3.08
e Socket across corners > 3.443 L1 - 3
t Socket depth, short lengths >2 L1- 3
t Socket depth, other lengths > 3.5 L1- 3
dt Cone flat diameter < 1.5 La - 3
y Cone angle (included), deg 90 L2 + 2
Vv Cone angle, short lengths, deg 120 L1- 2
di Basic minor diameter (end face) 4.9175 L1-2
tap Tap drill (method d - P) 5 L1- 2
a Socket-end chamfer angle, deg < 50 L2-1
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Page 1/2 Set screw, cone point - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S04027-DS-M6 revA Size datasheet - M6
'?) CommunityCAD
Lengths | Thread t leg Part key 6 full, short 22 120 iso4027-m6x6 8 full, long 2 38 90 is04027-m6x8 10 full, long 23.5 90 iso4027-m6x10 12 full, long 2 38 90 is04027-m6x12 16 full, long 23.5 90 is04027-m6x16 20 full, long > 3.5 90 iso4027-m6x20 25 full, long 23.5 90 is04027-m6x25 30 full, long 2 38 90 is04027-mé6x30
Fully threaded. t = the socket depth modeled (t min, short or long by length). Which lengths are short has one source (LO, #584 item 4).
Conventions
« Socket end: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit. * Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t min.
« Cone point: ISO 4753 TC, a cone at the Figure 1 i) angle (footnote f's angle on the lengths the data marks as short) down to the flat dt, modeled at dt max.
¢ Thread (threaded level): ISO 68-1 basic profile, the full length, cut by both ends. « Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb. 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25F9381 (kept outside the repo) fuller-iso4026 Fuller Fasteners 2026-10-25 49ba2edb36b7
fuller-iso4027 Fuller Fasteners 2026-10-25 03523ae5e142
fuller-iso4028 Fuller Fasteners 2026-10-25 Of0a658d8693
fuller-iso4029 Fuller Fasteners 2026-10-25 d420e5e6b5f8
fasten-it-is04026 fasten.it 2026-10-25 e111077c7750
fasten-it-iso4027 fasten.it 2026-10-25 4eé0ee0a98bé6
fasten-it-is04028 fasten.it 2026-10-25 b1f3ca7c19b6
fasten-it-iso04029 fasten.it 2026-10-25 198cb790d686
amesweb-is04026-4029 AMESweb 2026-10-25 0643acf2a4F2 iso4753-2011-sample-text ISO (preview published by iTeh Standards) n/a 7526d25F9381 (kept outside the repo) accu-iso4027 Accu Ltd (accu-components.com) 2026-10-26 a284827321d0
The whole series (verification map, corrections, drawings): CC-ISO4027-Ds.
ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Page 2/2 Set screw, cone point - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.