ISO 7380-1 hexagon socket button head screw, M6
Size drawing - M6 values on the views - | = 16 shown - enlarged 5:1
| = 16 shown lengths 10-60
dk = 10.285 10.07-10.50
rf = 5.90 (dome, on the axis) 5.65-6.15
k = 3.15
t= 2.08
hwe 0.74
d1 = 4.9175
View from above \
s = 4.0575 4.020-4.095
rs = 0.25, da < 6.8
= 50° (ISO 4753 CH)
Thread pitch
10.285 10.07-10.50
Head diameter
3.15
Head height 3.00-3.30
Flat top diameter So FEF
5.90 5.65-6.15
Dome radius
4.0575 4.020-4.095
Socket across flats
2 4.583 Socket across corners
> Socket depth 2 Zo
> Wall under socket 2 0.74
> Underhead fillet, part thread 29.25
> Underhead fillet, full thread 2 0.50
5.91 5.82-6
Shank diameter
< 6.8 Transition diameter
> Bearing face diameter 2 9.57
24 ref
Thread length
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD
Size drawing, M6
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
</ 2 = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 16 - L16.
Notes
s: the nominal is the key size; the socket is modeled at the middle of its band.
STANDARDS FOLLOWED ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread)
FAMILY / DETAIL Button head screw - M6
SHEET REV SCALE
CC-1S07380-SZ-Mé A 5:1
PROJECTION
UNITS
Dimensions in mm
SPEC VERSION LICENSE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
