'?) CommunityCAD
CC-1S07380-DS-Mé revA Size datasheet - M6
ISO 7380-1 M6 hexagon socket button head
screw
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread
Lengths
Files
Simplified - M6x16, front view, 2.5:1 Threaded - M6x16, front view, 2.5:1
Sym. Dimension
P Thread pitch
dk Head diameter
k Head height
dL Flat top diameter
rf Dome radius
s Socket across flats
e Socket across corners
t Socket depth
w Wall under socket
rs Underhead fillet, part thread rt Underhead fillet, full thread ds Shank diameter
da Transition diameter
dw Bearing face diameter
b Thread length
di Basic minor diameter (end face) tap Tap drill (method d - P)
a End chamfer angle, deg
M6 x 1, ISO metric coarse, right hand
12 generated, | = 10-60
24 STEP AP214 (simplified + threaded)
10.285 10.07-10.50
3.15 3.00-3.30
6.0 ref
5.90 5.65-6.15
4.0575 4.020-4.095
2 4.583 2 2.08 2 0.74
Iv
0.25
Iv
0.50
5.91 5.82-6
< 6.8 2 9.57
24 ref
4.9175 5 Ll +2
< 50 2-1
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source
value was corrected. Level - independent sources.
ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Button head socket screw - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
---
* CC-1S07380-DS-Mé revA '?) CommunityCAD Size datasheet - M6
Lengths | Thread Is Ig Part key 19 tothe head - - iso7380-m6x10 12 tothe head - - iso7380-m6x12 16 to the head - - iso7380-m6x16 20 tothe head - - iso7380-m6x20 25 tothe head - - iso7380-m6x25 30 tothe head = - is07380-m6x30 35 partial 26 $11 iso7380-m6x35 40 partial 211 < 16 iso7380-m6x40 45 __ partial > 16 < 21 iso7380-m6x45 50 partial 2 21 < 26 iso7380-m6x50 55 partial 2 26 < 31 iso7380-m6x55 60 partial 2 31 < 36 iso7380-m6x60
Is = plain shank (min), Ig = bearing face to the first full thread (max). To the head: full thread up to 3P from the bearing face. Listed by one source only, not generated: | = 6, 8, 14, 18, 22, 70, 80, 90, 100.
Conventions
« End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
* Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t.
e Head: flat top dL at k, dome rf centred on the axis down to dk, rim at dk; no knurl.
¢ Thread (threaded level): ISO 68-1 basic profile; full thread to Ig, quarter-turn fade toward the head. Threaded to the head: a core at 11 with rt. « Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh n/a 7526d25f9381 (kept outside the repo) Standards)
fasten-it-iso7380-1 fasten.it 2026-10-25 Ob30bee8c94e
fasteners-eu-iso7380-1 fasteners.eu 2026-10-25 786a69c06968
amesweb-iso7380-1 AMESweb 2026-10-25 4f662340a35a
amesweb-iso7380-1-Lengths AMESweb 2026-10-25 67d0b9F58c9a
iso7380-1-2011-sample ISO (preview published by iTeh n/a 9ca554d7cb13 (kept outside the repo) Standards)
iso7380-1-2011-sample-lengths ISO (preview published by iTeh n/a 9ca554d7cb13 (kept outside the repo) Standards)
The whole series (verification map, corrections, drawings): CC-ISO7380-DS.
ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Button head socket screw - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
