ISO 7380-1 hexagon socket button head screw, M6
Size drawing - M6 values on the views - | = 16 shown - enlarged 5:1
Source levels Main value = the modeled value (nominal, else the middle of min-max). Thread pitch Grey under a value = its min-max, where the dk = 10.285 source gives both. 10.07-10.50 . 10.285 < / = = the source gives only that limit, modeled at Head diameter 10.07-10.50 it. ref = reference. dL = 6.0 ref rf = 5.90 (dome, on the axis) L2 = the standard itself (or its complete free 5.65-6.15 Head height 5 5 preview, or the maker's drawing). : . L1 = two or more independent sources agree: the 6.0 ref release gate.
k = 3.15 LO = one source only: printed amber and marked a 5.90 . > : . | | w 2 0.74 Dome radius 5.65-6.15 c = a source value was corrected; the datasheet says how. Socket across flats 4.0575 House convention = a detail no source Cc IBIAS dimensions, drawn to a stated house rule. rs = 0.25, da s 6.8 > 4.583 This size's values: L2 16 - L16. ot ~ Socket across corners Notes > 2.08 s: the nominal is the key size; the socket is Socket depth a modeled at the middle of its band.
t= 2.08 Flat top diameter
> Wall under socket 2 0.74
| = 16 shown lengths 10-60 > Underhead fillet, part thread 29.25
> Underhead fillet, full thread 2 0.50
5.91 5.82-6
= 50° (ISO 4753 CH) S$ 6.8
Transition diameter
Bearing face diameter f
d1 = 4.9175 ' Thread length 24 ref
Shank diameter
2 9.57
Basic minor diameter (end face)
Tap drill (method d - P) View fro}
End chamfer angle, deg
s = 4.0575 4,020-4.095
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Button head screw - M6
SHEET REV SCALE PROJECTION UNITS CC-1S07380-SZ-Mé A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE 82d0e3F1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.