DIN 976-1 threaded rod, type A, 1m (DIN 975), M5
Size drawing - M5 values on the views - enlarged 5:1
Sym. Dimensi
Nominal diameter (modeled)
flat end face, type A (as rolled) Pitch, coarse thread (ISO 261)
di Minor diameter, basic (ISO 68-1)
Rod length, nominal
Mass per 1000 rods, kg (steel)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 1-L18.
Notes
dis the designation's nominal (M8 ~ 8): the modeled cylinder (ADR 0075 row 10). P and di describe the thread; it isn't modeled on a 1m rod (metadata only).
m: approximate mass of 1000 coarse-thread steel rods, 7.85 kg/dm* (cross-check). lis nominal; the length tolerance isn't modeled (ADR 0075 row 11).
thread M d, ISO 261 coarse (metadata only)
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 976-1:2016-09 type A (DIN 975) - ISO 261, ISO 68-1 (coarse thread) Threaded rod - M5
SHEET REV SCALE PROJECTION UNITS CC-DIN976-1-SZ-M5 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE €05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.