ISO 4035 hexagon thin nut (style 0), M5
Size drawing - M5 values on the views - enlarged 10:1
Sym. Dimensi
Thread pitch 8-68
7.89 7.78-8.00
Width across flats
2 8.79
Width across corners
2.575
Nut height 8 = 115° g 2.45-2.70
110°-120° 2 2.00
Wrenching height
6.90 Bearing face diameter
5.375 5.00-5.75
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
115 110-120
Countersink angle, deg
4.134 Basic minor diameter (crests)
tap Tap drill (method D - P)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 10 - L16.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014).
e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face: ISO 4035 has no washer face form, so there is no c (ADR 0040 row 5).
TITLE
'? CommunityCAD Size drawing, M5
f STANDARDS FOLLOWED FAMILY / DETAIL e= 8.79 ISO 4035:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M5 View froy above SHEET REV SCALE PROJECTION UNITS CC-1S04035-SZ-M5 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 82d0e3F1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.