M5 Square Nut, DIN 557 size drawing (PDF)

Datasheet — M5 Square Nut, DIN 557 by Milo

Open the PDF
M5 Square Nut, DIN 557Get the CAD modelM5 Square Nut, DIN 557CC-DIN557-SZ-M5.pdf

Text of this datasheet

DIN 557 square nut (product grade C), M5

Size drawing - M5 values on the views - enlarged 5:1

Sym. Dimensi

Thread pitch 8-68

7.82 7.64-8

Width across flats

10.615 9.93-11.3

Width across corners

3.76 3.52-4

Nut height

2.5

Height at the corners

. - 6.7 B = 22.5°* Bearing face diameter

15°-30° Chamfer angle, deg

Basic minor diameter (crests)

tap Tap drill (method D - P)

View from above (the plain face) Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 1- L112 - LO 1. Notes s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). e is not modeled on its own: the sharp square gives e = s-v2 from the modeled s, checked. dw min sets the bearing-face chamfer's face circle, (dw min + s) / 2. mw min is checked at the corners (the square's height left above the chamfer). B is the owner's entry from a maker drawing (one source, not required).

TITLE

'? CommunityCAD Size drawing, M5

STANDARDS FOLLOWED FAMILY / DETAIL

DIN 557:1994-01 - ISO 68-1/ ISO 261 (thread) Square nut - MS

SHEET REV SCALE PROJECTION UNITS CC-DIN557-SZ-M5 A 5:11 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.