DIN 557 square nut (product grade C), M5
Size drawing - M5 values on the views - enlarged 5:1
Sym. Dimensi
Thread pitch 8-68
7.82 7.64-8
Width across flats
10.615 9.93-11.3
Width across corners
3.76 3.52-4
Nut height
2.5
Height at the corners
. - 6.7 B = 22.5°* Bearing face diameter
15°-30°
Chamfer angle, deg
Basic minor diameter (crests)
tap Tap drill (method D - P)
e = 10.615 9.93-11.3 View from above (the plain face) Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 1- L112 - LO 1.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). e is not modeled on its own: the sharp square gives e = s-v2 from the modeled s, checked. dw min sets the bearing-face chamfer's face circle, (dw min + s) / 2.
mw min is checked at the corners (the square's height left above the chamfer).
B is the owner's entry from a maker drawing (one source, not required).
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 557:1994-01 - ISO 68-1/ ISO 261 (thread) Square nut - MS
SHEET REV SCALE PROJECTION UNITS CC-DIN557-SZ-M5 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.