ISO 4762 hexagon socket head cap screw, M5
Size drawing - M5 values on the views - | = 16 shown - enlarged 5:1
Source levels Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max). Thread pitch 9.8 Grey under a value = its min-max, where the source gives both. 8.39 < / = = the source gives only that limit, modeled at it. 8.28-8.50 ref = reference. L2 = the standard itself (or its complete free preview, S$ 8.72 or the maker's drawing).
Head diameter, plain
Head diameter, knurled 1 L1 = two or more independent sources agree: the
release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says 4.0575 how.
4.020-4.095 House convention = a detail no source dimensions,
View from above Head height pen 4.82-5.00
Socket across flats
> 4.583 drawn to a stated house rule. Socket across corners This size's values: L2 1- L119 - LO 2. Notes >2.5 s: the nominal is the key size; the socket is modeled at
the middle of its band.
s = 4.0575 4,020-4.095
Socket depth
r= 0.275*, da < 5.7 r0.2-0.35 1.9 Wall under socket .
Head top chamfer 8.5
|= 16 shown ; . 0.275* lengths 8-50 Underhead fillet radius Denes
4.91 4.82-5.00
Shank diameter
< Transition diameter S Bod
= 50° (ISO 4753 CH) Bearing face diameter =)8-H5
Thread length
22 ref
d1= 4.134 4.134
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Socket head cap screw - M5
SHEET REV SCALE PROJECTION UNITS CC-1804762-SZ-M5 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE 54d2547caedeObédef71904216be1e6990995d2a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.