M5 Nylon Insert Lock Nut, ISO 10511 size drawing (PDF)

Datasheet — M5 Nylon Insert Lock Nut, ISO 10511 by Milo

Open the PDF
M5 Nylon Insert Lock Nut, ISO 10511Get the CAD modelM5 Nylon Insert Lock Nut, ISO 10511CC-ISO10511-SZ-M5.pdf

Text of this datasheet

ISO 10511 nylon insert lock nut (thin, non-metallic insert), M5

Size drawing - M5 values on the views - enlarged 5:1

Sym. Dimensi

Thread pitch 8-68

7.89 7.78-8.00

Width across flats

2 8.79 Width across corners

Hexagon height BoC

4.76 4.52-5.00

Nut height (to the collar top)

2 1.96 = Wrenching height D=M5' > Bearing face diameter 2 6.90

dw = 6.90

5.375 5.00-5.75

Countersink diameter

22.5 15-30

Corner chamfer angle, deg

105 90-120

Countersink angle, deg

4.134 Basic minor diameter (crests)

s = 7.89 , 7.78-8.00 tap Tap drill (method D - P)

Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. e= 8.79 LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 11-L16. Notes s: modeled at the middle of its s min-max band (ADR 0014). m is modeled at m min. e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face (ISO 10511 has none, so no c). Countersink on the bearing face only (ADR 0047).

View from above

TITLE

'? CommunityCAD Size drawing, M5

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 10511:2012 (withdrawn) - ISO 68-1 / ISO 261 (thread) Lock nut - M5

SHEET REV SCALE PROJECTION UNITS CC-1S8010511-SZ-M5 A 5:11 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.