M5 Hex Nut, ISO 4032 / DIN 934 datasheet (PDF)

Datasheet — M5 Hex Nut, ISO 4032 / DIN 934 by Milo

Open the PDF
M5 Hex Nut, ISO 4032 / DIN 934Get the CAD modelM5 Hex Nut, ISO 4032 / DIN 934CC-ISO4032-DS-M5.pdf

Text of this datasheet

'?) CommunityCAD

CC-1S04032-DS-M5 revA Size datasheet - M5

ISO 4032 M5 hexagon regular nut

Size datasheet: this size's values with their levels, conventions and sources.

Simplified - M5, front view, 4:1

mw dw

da

D1

tap

Dimension Thread pitch

Width across flats

Width across corners

Nut height

Wrenching height Bearing face diameter

Countersink diameter

Washer face height (not modeled)

Corner chamfer angle, deg

Countersink angle, deg

Basic minor diameter (crests)

Tap drill (method D - P)

Threaded - M5, front view, 4:1

Thread M5 x 0.8, ISO metric coarse, right hand

Part key iso4032-m5

Files 2 STEP AP214 (simplified + threaded)

Value Level

0.8 l2-

7.89 7.78-8 .08

2 8.79

4.55 4.40-4.70

2 3.50 . 5.00-5.75

0.325 8.15-0.50

22.5 15-30

105 90-120

4 L 2

4.134 1-

4.2 La - 2

Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources. e follows from s and is checked = e min; dw min sets the chamfer's face circle; mw min is checked at mid-flat; c is

data only.

ISO 4032:2012 - ISO 68-1/ ISO 261 (thread)

Hexagon nut - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

Page 1/2 spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

---

* CC-1S04032-DS-M5 revA '?) CommunityCAD Size datasheet - M5

Conventions

e Hexagon: regular at the modeled s (the middle of its band), one corner on +X, sharp edges.

« Corner chamfer on both faces: a cone at B (range midpoint) meeting the face on (dw min + s) / 2. Not specified by the standard. « Countersink on both faces at da and 9, both at their range midpoints.

¢ Bore: plain at D (simplified); ISO 68-1 basic internal thread over the full height (threaded), cut by the countersinks.

« No washer face, no markings. Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.

Sources

Source Publisher Retrieved sha256

amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a

pule-tap-drill CommunityCAD 2026-10-23 625b582c306e

pule-basic-minor CommunityCAD 2026-10-23 00329692204

fasteners-eu-iso04032 fasteners.eu 2026-10-25 b9077Sa2aa03

fasten-it-is04032 fasten.it 2026-10-25 6c2c140d9876

amesweb-iso4032 AMESweb 2026-10-25 0213f81cc358

iso4032-2012-sample ISO (preview published by iTeh Standards) n/a 100e675e82ee (kept outside the repo)

The whole series (verification map, corrections, drawings): CC-ISO4032-DS.

ISO 4032:2012 - ISO 68-1/ ISO 261 (thread) Page 2/2 Hexagon nut - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.