ISO 4032 hexagon regular nut (style 1), M5
Size drawing - M5 values on the views - enlarged 10:1
Sym. Dimensi
Thread pitch 8-68
7.89 7.78-8.00
Width across flats
> | ———————_9 = 105° Width across corners 2 8.79
90°-120° 4.55 4.40-4.70
m = 4.55 2 3.50 4.40-4.70 Wrenching height 7
Nut height
6.90 Bearing face diameter
5.375 5.00-5.75
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
105 90-120
Countersink angle, deg
4.134 Basic minor diameter (crests)
tap Tap drill (method D - P)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 11-L16.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014).
e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. Washer face c is not modeled (nuts are delivered without one); it is listed in the datasheet.
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL ISO 4032:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M5 1 SHEET REV SCALE PROJECTION UNITS es B79 CC-1S04032-SZ-MS A 10:1 & Dimensions in mm ' SPEC VERSION LICENSE PAGE c11b872e81fe4ea779a93a8b42a2cSdadf16472d CC-BY 4.0 IronPixel Labs LLC 1/1
View from above
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.