ISO 4017 hexagon head screw, M5
Size drawing - M5 values on the views - | = 20 shown - enlarged 5:1
Sym. Dimensi
Thread pitch
Width across flats
Width across corners
3.5 3.35-3.65
Head height
> dw = 7.20c —~ Wrenching height 2 2.35
0.325
r2=0.20, da < 5.7 Washer face height ores 0.15-0.50
> Bearing face diameter 2 7.20¢
Head top chamfer, deg
| = 20 shown Underhead fillet radius lengths 10-50
Transition diameter
d=M5 Thread run-out under head 1.60 0.80-2.40 Basic minor diameter (end face) Godlsts <= 50° (ISO 4753 CH) Tap drill (method d - P) . SS End chamfer angle, deg
d1 = 4.134 Source levels Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). View fro, L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 15 - L16.
Notes
s: modeled at the middle of its band; e and kw are checks, not modeled.
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head screw - M5
SHEET REV SCALE PROJECTION UNITS CC-1S804017-SZ-M5 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE €05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.