'?) CommunityCAD
CC-1S04017-DS-M5 revA Size datasheet - M5
ISO 4017 M5 hexagon head screw
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Simplified - M5x20, front view, 2.5:1
kw
dw
da
di tap
a
Dimension Thread pitch
Width across flats
Width across corners
Head height
Wrenching height
Washer face height
Bearing face diameter
Head top chamfer, deg
Underhead fillet radius Transition diameter
Thread run-out under head
Basic minor diameter (end face) Tap drill (method d - P)
End chamfer angle, deg
Threaded - M5x20, front view, 2.5:1
M5 x 0.8, ISO metric coarse, right hand
10 generated, | = 10-50
20 STEP AP214 (simplified + threaded)
Value Level 0.8c
7.89 7.78-8 .08
2 8.79c
2 2.35
0.325 8.15-0.50
L2 - 4 22.5 15-30
Li - 2
Li - 2
1.60 8.80-2.48
4.134 4.2 < 50
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Hex head screw - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec e05c8289049003c09e32d8bd4ae913179e09a28c
---
CC-1S04017-DS-M5 revA Size datasheet - M5
'?) CommunityCAD
Lengths | Thread Is Ig Part key 10 tothe head - - iso4017-m5x10 12 tothe head - - iso4017-m5x12 16 tothe head - - is04017-m5x16 20 tothe head - - iso4017-m5x20 25 tothe head - - iso4017-m5x25 30 tothe head = - 1is04017-m5x30 35 tothe head - - is04017-m5x35 40 tothe head - - iso4017-m5x40 45 tothe head - - is04017-m5x45 50 tothe head - - iso4017-m5x50
Threaded to the head: the full thread from a (middle of 1P-3P).
Conventions
« End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
« Head: hexagon at the modeled s, one corner on +X; washer face (dw min + s) / 2, c high; top chamfer at B (house construction, ADR 0052 amendment 1).
¢ Thread (threaded level): ISO 68-1 basic profile, right hand.
« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25f9381 (kept outside the repo) iso4017-2022-sample ISO (preview published by iTeh Standards) n/a #41658422832 (kept outside the repo) iso4017-2022-sample-figure ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4014-2022-sample ISO (preview published by iTeh Standards) n/a 2e44b7555604 (kept outside the repo) fasten-it-iso4017 fasten.it 2026-10-25 395693958e2b
fasten-it-iso4014 fasten.it 2026-10-25 50a81d6072b8
fasteners-eu-iso4017 fasteners.eu 2026-10-25 161753a8c338
globalfastener-iso4017 globalfastener.com (Internet Archive copy, 2026-10-25 6c30078c626e
captured 2020-07-12)
globalfastener-iso4017-2022 globalfastener.com (Internet Archive copy, 2026-10-25 9aa6930a2aa3 captured 2026-03-16)
fuller-iso4014 Fuller Fasteners 2026-10-25 1130347fbf24 engineersedge-iso4014-4017 Engineers Edge 2026-10-25 1466bfae2ba8
The whole series (verification map, corrections, drawings): CC-ISO4017-Ds.
ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Page 2/2 Hex head screw - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e05c8289049003c09e32d8bd4ae913179e09a28c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.