ISO 4014 hexagon head bolt, M5
Size drawing - M5 values on the views - | = 25 shown - enlarged 2:1
Source levels
Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max).
Thread pitch . Grey under a value = its min-max, where the source gives both. 7.89 </ = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free
Width across flats 7.78-8.00
B = 22.5° > 8.79¢
15°30° Width across corners preview, or the maker's drawing). k=3.5 L1 = two or more independent sources agree: the 3.35-3.65 c= 0.325 3.5 release gate.
0.15-0.50 Head height - - orl * dw = 7.20c —— BBB LO = one source only: printed amber and marked *.
Ig < 9.0, Is = 5.0 r20.20, das 5.7
c = a source value was corrected; the datasheet 2 2.35 says how. House convention = a detail no source dimensions,
Wrenching height
drawn to a stated house rule. 0.325
12 25sh Washer face height This size's values: L2 15 - L16. = 0.15-0.50 shown Notes
lengths 25-50 2 7.20c s: modeled at the middle of its band; e and kw are
Bearing face diameter checks, not modeled.
Head top chamfer, deg
= 50° (ISO 4753 CH)
Underhead fillet radius
Transition diameter
4.91 4.82-5.00
Shank diameter
View from above
' Thread length 1S (RO
o> s=7.89 Transition length
7.78-8.00 Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - MS
SHEET REV SCALE PROJECTION UNITS CC-1804014-SZ-M5 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE e05c8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.