CC-1S04014-DS-M5 revA Size datasheet - M5
'?) CommunityCAD
ISO 4014 M5 hexagon head bolt
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread M5 x 0.8, ISO metric coarse, right hand
Lengths 6 generated, | = 25-50
Files 12 STEP AP214 (simplified + threaded)
Simplified - M5x25, front view, 2:1 Threaded - M5x285, front view, 2:1
Sym. Dimension Value Level
P Thread pitch 0.8c¢
s Width across flats 7.89 pe | 7.78-8.00
e Width across corners 2 8.79c pe 4
k Head height eC
kw Wrenching height 2 2.35 pe |
c Washer face height 0.325 pe 0.15-0.50
dw Bearing face diameter 2 7.20c pes |
B Head top chamfer, deg 22.5 ae
15-30
r Underhead fillet radius 2 0.20 pes |
da Transition diameter 5.7 nn
ds Shank diameter 4.91 ma 4.82-5.00
b Thread length 16 ref Pp es |
lf Transition length < 2
d1 Basic minor diameter (end face) 4.134
tap Tap drill (method d - P)
a End chamfer angle, deg a
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 1/2 Hex head bolt - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e05c8289049003c09e32d8bd4ae913179e09a28c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S04014-DS-M5 revA Size datasheet - M5
'?) CommunityCAD
Lengths | Thread Is Ig Part key 25 partial 2 5.0 <$ 9.0 is04014-m5x25 30 partial > 10.0 <$ 14.0 is04014-m5x30 35 partial 2 15.0 < 19.0 is04014-m5x35 40 partial > 20.0 < 24.0 iso4014-m5x40 45 partial 2 25.0 < 29.0 is04014-m5x45 50 partial > 30.0 < 34.0 is04014-m5x50
Is = plain shank (min), Ig = bearing face to the first full thread (max).
Conventions
« End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
« Head: hexagon at the modeled s, one corner on +X; washer face (dw min + s) / 2, c high; top chamfer at B (house construction, ADR 0052 amendment 1).
« Thread (threaded level): ISO 68-1 basic profile, right hand. « Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25f9381 (kept outside the repo) iso4017-2022-sample ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4017-2022-sample-figure ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4014-2022-sample ISO (preview published by iTeh Standards) n/a 2e44b7555604 (kept outside the repo) fasten-it-iso4017 fasten.it 2026-10-25 395693958e2b
fasten-it-iso4014 fasten.it 2026-10-25 50a81d6072b8
fasteners-eu-iso4017 fasteners.eu 2026-10-25 161753a8c338
globalfastener-iso4017 globalfastener.com (Internet Archive copy, 2026-10-25 6c30078c626e
captured 2020-07-12)
globalfastener-iso4017-2022 globalfastener.com (Internet Archive copy, 2026-10-25 9aa6930a2aa3 captured 2026-03-16)
fuller-iso4014 Fuller Fasteners 2026-10-25 1130347fbf24 engineersedge-iso4014-4017 Engineers Edge 2026-10-25 1466bfae2ba8
The whole series (verification map, corrections, drawings): CC-ISO4014-Ds.
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Hex head bolt - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e05c8289049003c09e32d8bd4ae913179e09a28c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.