ISO 7089 plain washer, normal series, grade A, M5
Size drawing - M5 values on the views - enlarged 10:1
Dimension
5.3 5.30-5.48
Hole diameter (nom = min)
Outside diameter (nom = max) 10
9.64-19.00 d2 =10 9.64-10.00 1
Thickness
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 3.
Notes
d1 nom = d1 min and d2 nom = d2 max (the standard's own convention); h nom lies in its band. Edges are sharp, walls square to the faces: house conventions, sheet DO2.
TITLE
; '? CommunityCAD Size drawing, M5 a2 = 10 ‘STANDARDS FOLLOWED FAMILY / DETAIL ] ISO 7089:2000 Plain washer - MS
SHEET REV SCALE PROJECTION UNITS View from above CC-1S07089-SZ-M5 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
