ISO 4026 hexagon socket set screw, flat point, M5
Size drawing - M5 values on the views - | = 6 shown - enlarged 10:1
Sym. Dimensi
Thread pitch
di = 4.134 Socket across flats Gok 2.52-2.58
a = 50° (CH)
2 2.873 Socket across corners
Socket depth, short lengths Socket depth, other lengths |= 6 shown Flat point diameter
lengths 5-25
Point chamfer to axis, deg
Basic minor diameter (end face)
Tap drill (method d - P)
B s 50° (ISO 4753 FL)
Socket-end chamfer angle, deg
Source levels Main value = the modeled value (nominal, else the middle of min-max). View on the socket end Grey under a value = its min-max, where the source gives both. 1 < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117. Notes Short lengths (sheet DO1) take the 'short' t.
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, flat point - M5
SHEET REV SCALE PROJECTION UNITS CC-1S804026-SZ-M5 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE
cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
