M5 Flanged Button Head Screw, ISO 7380-2

This M5 flanged button head screw (ISO 7380-2) comes in 6 lengths from 10 to 30 mm, each as simplified and threaded STEP. Its head measures 8.44 to 8.8 mm across and 2.5 to 2.75 mm tall; the socket takes a 3 mm hex key.

How these parts are made, and what the levels mean: read the method

• Also searched as: M5 bolt, M5 x 10 to M5 x 30 bolts
• Model id: iso7380-2-m5
• Standard: ISO 7380-2:2022 · thread M5 × 0.8, ISO metric coarse, right hand

Lengths

Length (mm)	Part key	Simplified	Threaded
10	iso7380-2-m5x10	STEP	STEP
12	iso7380-2-m5x12	STEP	STEP
16	iso7380-2-m5x16	STEP	STEP
20	iso7380-2-m5x20	STEP	STEP
25	iso7380-2-m5x25	STEP	STEP
30	iso7380-2-m5x30	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
P	Thread pitch		0.8		0.8	nominal	L2
b	Thread length		22 ref		22	reference value	L1
c	Collar height	0.8		1	0.9	midpoint of min–max	L2
da	Transition diameter			5.7	5.7	single limit (max), modeled at the limit	L2
dc	Collar diameter	11.1		11.8	11.45	midpoint of min–max	L2
dk	Head diameter	8.44		8.8	8.62	midpoint of min–max	L2
dL	Head top diameter		5 ref		5	reference value	L2
ds	Shank diameter	4.82		5	4.91	midpoint of min–max	L2
dw	Bearing face diameter	9.99			9.99	single limit (min), modeled at the limit	L2
e	Socket width across corners	3.44			3.44	single limit (min), modeled at the limit	L2
k	Head height	2.5		2.75	2.625	midpoint of min–max	L2
rf	Head dome radius	5.25		5.75	5.5	midpoint of min–max	L2
rs	Underhead fillet radius, plain shank	0.2			0.2	single limit (min), modeled at the limit	L2
rt	Underhead fillet radius, fully threaded	0.45			0.45	single limit (min), modeled at the limit	L2
s	Socket width across flats	3.02	3	3.08	3.05	midpoint of min–max	L2
t	Socket depth	1.56		2.12	1.84	midpoint of min–max	L2
wb	Wall thickness	0.38			0.38	single limit (min), modeled at the limit	L2
P	Coarse thread pitch		0.8		0.8	nominal	L1
tap_drill	Tap drill diameter		4.2		4.2	nominal	L1
d1	Basic minor diameter		4.1339744		4.1339744	nominal	L1
ch_angle	Chamfered end angle			50	50	single limit (max), modeled at the limit	L2
dh_fine	Clearance hole, fine series		5.3		5.3	nominal	L1
dh_medium	Clearance hole, medium series		5.5		5.5	nominal	L1
dh_coarse	Clearance hole, coarse series		5.8		5.8	nominal	L1

Thread and holes

• Tap drill: 4.2 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
• Clearance hole (ISO 273): close 5.3, normal 5.5, loose 5.8 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).

Drawing

As a PDF: CC-ISO7380_2-SZ-M5.pdf.

Goes with the M5 flanged button head screw

• Hex key: 3 mm, the socket's nominal width across flats (s) in the table above.
• ISO 4032 hex nut, the same size as this M5 flanged button head screw: M5 Hex Nut (Hexagon Nut), ISO 4032 / DIN 934
• ISO 7089 flat washer, the same size as this M5 flanged button head screw: M5 Flat Washer (Plain Washer), ISO 7089

The M5 flanged button head screw beside the M4 and the M6

The M5 is number 3, counting from the smallest, of the 5 ISO 7380-2 flanged button head screws published here, from M3 to M8.

• Thread pitch (P): 0.8 mm on the M5 flanged button head screw, against 0.7 mm on the M4 and 1 mm on the M6.
• Thread length (b): 22 mm (reference) on the M5 flanged button head screw, against 20 mm (reference) on the M4 and 24 mm (reference) on the M6.
• Collar height (c): 0.8 to 1 mm on the M5 flanged button head screw, against 0.65 to 0.8 mm on the M4 and 1 to 1.2 mm on the M6.
• Transition diameter (da): up to 5.7 mm on the M5 flanged button head screw, against up to 4.7 mm on the M4 and up to 6.8 mm on the M6.
• Collar diameter (dc): 11.1 to 11.8 mm on the M5 flanged button head screw, against 8.82 to 9.4 mm on the M4 and 12.9 to 13.6 mm on the M6.
• Head diameter (dk): 8.44 to 8.8 mm on the M5 flanged button head screw, against 6.84 to 7.2 mm on the M4 and 9.64 to 10 mm on the M6.
• Head top diameter (dL): 5 mm (reference) on the M5 flanged button head screw, against 3.8 mm (reference) on the M4 and 6 mm (reference) on the M6.
• Shank diameter (ds): 4.82 to 5 mm on the M5 flanged button head screw, against 3.82 to 4 mm on the M4 and 5.82 to 6 mm on the M6.

Other sizes

• One size smaller: M4 Flanged Button Head Screw, ISO 7380-2, 6.84 to 7.2 mm head, 2.5 mm hex key.
• One size larger: M6 Flanged Button Head Screw, ISO 7380-2, 9.64 to 10 mm head, 4 mm hex key.

Documents

• CC-ISO7380_2-DS-M5.pdf: M5 datasheet: values with levels, lengths, sources
• CC-ISO7380_2-SZ-M5.pdf: M5 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

albany-clearance, amesweb-tap-drill, bossard-bn30104-lengths, fasten-it-iso7380-2, fasteners-eu-iso7380-2, globalfastener-iso7380-2, iso4753-2011-sample, iso7380-2-2022-sample, reca-iso7380-2, rule-basic-minor, rule-iso7380-2-lg, rule-iso7380-2-u-head, rule-tap-drill, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.