* CC-DIN6923-DS-M5 revA '?) CommunityCAD Size datasheet - M5
DIN 6923 M5 hexagon nut with flange
Size datasheet: this size's values with their levels, conventions and sources.
Thread M5 x 0.8, ISO metric coarse, right hand Part key din6923-m5 Files 2 STEP AP214 (simplified + threaded) Simplified - M5, front view, 3:1 Threaded - MS5, front view, 3:1 Sym. Dimensi Value Level P Thread pitch 0.8 L1- 2 s Width across flats 7.89 L1- 2 7.78-8 e Width across corners > 8.79 L1- 2 m Nut height 4.85 L1- 3 4.7-5 m' Wrenching height > 2.2 L1- 2 ic Flange thickness at the rim >1 L1- 2 de Flange diameter < 11.8 L1- 3 dw Bearing face diameter > 9.8 L1- 2 da Countersink diameter 5.375 L1- 2 5-5.75 r Fillet, hexagon to flange < 0.3 L1- 2 dw' ISO 4032 dw (top chamfer circle) > 6.9 La - 2 B Top chamfer angle (ISO 4032), deg 22.5 15-30 8 Countersink angle (ISO 4032), deg 105 90-120
D1 Basic minor diameter (crests) 4.134
tap Tap drill (method D - P) 4.2 La - 2
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources. e follows from s and is checked = e min; m' min is checked over every flat; dw', B and 6 are ISO 4032's at the same s.
DIN 6923:1983 - ISO 4032:2012 (top chamfer, 8) - ISO 68-1 / ISO 261 (thread) Page 1/2 Hexagon flange nut - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-DIN6923-DS-M5 revA Size datasheet - M5
'?) CommunityCAD
Conventions
e Hexagon: regular at the modeled s (the middle of its band), one corner on +X, sharp edges.
« Top corner chamfer: ISO 4032's cone at B meeting the face on (dw' + s) / 2. Not specified by the standard (owner, #583 item 1).
« Flange: rim at dc, c high; cone to the hex corners at (c + m-m' min) / 2; fillet r at the foot of each flat; bearing edge round (dc - dw min) / 4. Not specified by the standard (owner, #583 item 3).
« Countersink on both faces at da, with ISO 4032's 6.
« Bore: plain at D (simplified); ISO 68-1 basic internal thread over the full height (threaded), cut by the countersinks.
« Plain bearing face, no markings. Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 fasteners-eu-iso04032 fasteners.eu 2026-10-25 b90775a2aa03 amesweb-iso4032 AMESweb 2026-10-25 0213f81cc358 iso4032-2012-sample ISO (preview published by iTeh Standards) n/a 100e675e82ee (kept outside the repo) fasteners-eu-din6923 fasteners.eu 2026-10-25 849b128eff4a globalfastener-din6923 globalfastener.com (Internet Archive copy, 2026-10-25 c07979587F3 captured 2025-04-19) fasten-it-din6923 fasten.it 2026-10-25 0f1743a21c9d
The whole series (verification map, corrections, drawings): CC-DIN6923-DS.
DIN 6923:1983 - ISO 4032:2012 (top chamfer, 8) - ISO 68-1 / ISO 261 (thread) Page 2/2 Hexagon flange nut - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.