M5 Flange Nut, DIN 6923 size drawing (PDF)

Datasheet — M5 Flange Nut, DIN 6923 by Milo

Open the PDF
M5 Flange Nut, DIN 6923Get the CAD modelM5 Flange Nut, DIN 6923CC-DIN6923-SZ-M5.pdf

Text of this datasheet

DIN 6923 hexagon nut with flange, M5

Size drawing - M5 values on the views - enlarged 5:1

Source levels Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max). Thread pitch . Grey under a value = its min-max, where the source gives both. da = 5.375 Omer Gens s/ 2 = the source gives only that limit, e 28.79 5-5.75 modeled at it. ref = reference. L2 = the standard itself (or its complete Width across corners free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *.

Nut height

Wrenching height c = a source value was corrected; the

datasheet says how. Flange thickness at the rim House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 11- L116. Notes Bearing face diameter . s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). eis not modeled on its own: the regular hexagon gives e = 2s/v3 from the Fillet, hexagon to flange . modeled s, = e min.

dw' (ISO 4032 dw min at the same s) ISO 4032 dw (top chamfer circle) . sets the top chamfer's face circle, (dw' +s)/2. The flange cone meets the corners at (c +m -m' min) / 2; m' min is checked over each flat. Countersink angle (ISO 4032), deg ris modeled at r max, except at M8: the largest r that keeps m' min at mid-flat (#662). dw min sets the bearing edge round, (dc

- dw min) / 4. Plain bearing face, no Tap drill (method D - P) . serrations.

Flange diameter

Countersink diameter

Top chamfer angle (ISO 4032), deg

Basic minor diameter (crests)

TITLE

'? CommunityCAD Size drawing, M5

STANDARDS FOLLOWED FAMILY / DETAIL

DIN 6923:1983 - ISO 4032:2012 (top chamfer, 8) - ISO 68-1/ ISO 261 (thread) Hexagon flange nut - M5

SHEET REV SCALE PROJECTION UNITS CC-DIN6923-SZ-M5 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.